REQUIREMENTS

• You will need an onboard air supply. Any air supply capable of delivering 90 psi of clean, dry air can be used.
• For more air compressor information, see: ARB Compressor Info

Guidelines for installation:

• The installation process is very similar to changing the gears in the differential and requires special tools and know-how. It is important for the installation to be completed by someone with the proper training.
• The condition of the gears, bearings and other axle components should be thoroughly inspected and replaced as necessary. The installation of an air locker in an assembly with worn gears or bearings can lead to premature failure and may impact the unit's warranty.
• If the gears are reused, extreme care should be used to replicate the original gear mesh, ensuring that the original wear pattern is continued. Failure to do so could result in operational noise.
• The original bearings are difficult to remove from the carrier. powerwagonlocker.com recommends the replacement of these bearings during the installation of the air locker. The approximate cost of these bearings is $80.